2900*183*16mm Large and Small Brick Pattern thermal insulation Sandwich Panel

0086-539-8608988

Tel: 0086-539-8608988
Fax: 0086-539-8013392
Mob:0086 186 6966 0999
E-mail: sales@consmos.com
Skype: consmosgroup
Office Address: F16,Building A,Langrun Mansion,Yimeng Road North,Lanshan District,Linyi City,Shandong,China 276000
NEW Factory Address: Xuezhang Town,Feixian County ,Linyi City,Shandong,China

Position： HOME > PRODUCTS > SANDWICH PANEL

name: 2900*183*16mm Large and Small Brick Pattern thermal insulation Sandwich Panel
about:

　 Linyi Consmos New Building Materials Co., Ltd was established in 2010. We located in Linyi City, Shandong Province, with convenient transportation, developed logistics and outstanding location advantages.
We specialize in the development, production and sales of Wood Plastic Composite(WPC) for interior and exterior, PUR, PVC and other new materials.

0086-186 6966 0999

sales@consmos.com

DETAIL

Fireproof Heat Insulation Material Expanded Polystyrene Foam EPS PU Polyurethanes Sandwich Wall Panel

What is sandwich panel?

Sandwich panels are a composite modular building material structural system. Made of colored embossed metal sheets, aluminum foil and polyurethane insulation, these panels are a fireproof, waterproof, heat-insulating and noise-reducing decorative material specifically for exterior walls.

The outer steel plate is formed with full consideration of the structural and strength requirements, and takes into account the aesthetics, and the inner surface layer is formed into a flat plate to suit various needs.

The finished sandwich panels are available in a variety of colors, are easy to install, lightweight, efficient, impact-resistant, and formaldehyde-free, providing green and environmentally friendly protection and decoration for buildings.

Density(PU)	42 kg/m²
Compressive Strength (PU)	295 kpa
Thermal Conductivity (PU)	Average Temperature: 10C	0,022W (m-K)
	Average Temperature: 25C	0,024W(m-K)
Water Absorption	0.8%
Vertical Tensile Strength (Siding)	1.6 kpa
Flexural Capacity (Siding)	Vertical	5.44Mpa
	Horizontal	3.88Mpa
Salt Spray (Steel Sheet)	Neutral Salt Spray	No damage within 500 hrs
Acid Resistance (Steel Sheet)	5% Sulfuric Acid	No Abnormality Detected Within 24 hrs
Alkali Resistant (Steel Sheet)	5% Socium Oxychloride	No Abnormality DetectedWithin24 hrs
High Temperature Resistance (Steel Sheet)	600ºC
Closed Cell Ratio (PU)	99.7%
Aluminum-Zinc Alloy Coated	55% Aluminum,43% Zinc
Wind Pressure Resistance (Siding)	10 kpa thesample is not damaged
Heat Transfer Coefficient	1.050w (mf-K)
Sound Reduction Index	25dB
Substrate Thickness	0.25~0.27 mm
Coating Layer	55~75g
Coating Thickness	≥20 um
Coating Type	High Weather-Resistant Polyester Paint
Polyurethane Density	40~42 kg/m²
Backing Film	Aluminum Foil & Fiber Fabric Composite Material
Manufacturing Process	300C High-temperature Baking
Finished Product Weight	3.0~3.7kg/m²
Noted	We can customize specific requirements.

Features of Metal Carving Sandwich Panel:

1.Thermal insulation
Metal wall panels have good thermal insulation performance, which can significantly reduce heating and cooling energy consumption and save energy expenditure

2.Waterproof and moisture-proof,fireproof
The excellent structure of the metal carved board and the compact concave-convex plug-in buckle groove installation method between the boards can avoid rain and snow. After installation, it can eliminate the possibility of structural damage and freezing caused by wall seepage.

3.Sound insulation and noise reduction

The core material in the middle of the sandwich panel is a high-density hard polyurethane foam insulation layer, which has an independent closed bubble structure inside and has good sound insulation effect

4.Earthquake-proof and crack-resistant

The sip sandwich panel is light in weight, high in strength and good in impact resistance. The advantage of light weight not only reduces the burden on the building itself, but also greatly reduces the impact of earthquakes on the building. The board is installed on a light steel structure building, with strong integrity, earthquake resistance and crack resistance, and is solid and safe.

5.Sturdy and durable

The metal carved panels can be flexibly disassembled and reinstalled, and the scraps can be recycled and reused. The construction process reduces construction waste and is easy to clean and durable.

6.Green and environmentally friendly

Metal sandwich panels have a stable chemical and physical structure, will not decompose and toxicate, and have no radiation or pollution.

7.Strong decorative effect

Gives more choices to architectural design: PU sandwich panels have real carved patterns and rich color combinations, which can be used to highlight their grade and taste. With its flexible disassembly and assembly methods, it is easy to match or replace wall designs.

8.Convenient construction and easy installation

The installation method of sandwich panel is simple and fast, and is not restricted by seasonal climate and geographical environment.
It can significantly shorten the project progress and save construction costs and construction costs.While heat insulation, it minimizes the load on the exterior wall and increases the availability of space and land.

Packing and shipping
China factory,wholesale price, excellent quality, surprise service,welcome inquiry I will reply to you immediately!

Message consultation

Product recommendation

FAQ

1.What are the advantages of your 100% birch plywood?

1)Professional producing with up to 35 producing procedures
2)imported birch veneer from Russia directly, selected birch veneer
3) Deep knowledge of high grade 100% birch plywood, equivalent to Russian and Finland top birch plywood producers
4)Lower formaldehyde emission, healthy and responsible for nature and society
5)Grading professionally for different applications. We have Top grade LUXPLY birch plywood series of S5 and s100, we have PLYNOVO birch plywood A and A+ series

2.CUSTOMER LOGO IS AVAILABLE FOR FILM FACED PLYWOOD?

Sure. No problem. Customer logo is available.

3.COULD YOU INTRODUCE CONSMOS FILM FACED PLYWOOD?

CONSMOS Film Faced Plywood
1)Has grade from 1 star to 7 star.
2)It can be reused 2 times, 6 times,8 times,12 times, or more than 30 times.
3)The core can be finger joint, poplar, poplar&eucalyptus, hardwood, birch etc.

4.WHAT PRODUCTS DO YOU SPECIALIZE IN?

We specialize in producing full Birch Plywood, OSB, Film Faced Plywood, MDF, Fancy Plywood, Commercial Plywood, Door Skin HDF , Chipboard, LVL/LVB and etc.

5.HOW DO YOU CONTROL QUALITY?

Our professional QC team will inspect all boards piece by piece before packing and shipment, Consmos does not allow defective board to be shipped.

6.WHAT CERTIFICATIONS DO YOU HAVE?

We have passed Europe CE and EUTR, ISO, FSC, America CARB/EPA and TSCA certification. Our products are reliable and authentic on the international plywood market.